Skip to Content Information Center
Markvision Enterprise

Markvision Enterprise

Configuring general settings

  1. Click on the upper‑right corner of the page.

  2. Click General, and then select a host name source.

    • Printer—The system retrieves the host name from the printer.
    • Reverse DNS Lookup—The system retrieves the host name from the DNS table using the IP address.
  3. Set the alert reregistration frequency.

    Note:  Printers may lose the alert registration state when changes are made, such as rebooting or updating the firmware. MVE attempts to recover the state automatically on the next interval set in the alert reregistration frequency.

  4. Click Save Changes.

Was this article helpful?
Top