Skip to Content Information Center
Lexmark Cloud Services

Lexmark Cloud Services

Not your product?

Enrolling printers from the Embedded Web Server

These instructions apply only to the following conditions:

  • You have not pre‑enrolled the printer.
  • You have not enrolled the printer using the Native Agent.
  • The printer is manufactured and shipped with firmware 075.001 or later.
  • The recommended firmware is 081.215 or later.

    • Note:  To determine the printer firmware version, see Viewing the printer firmware version.

  1. From the Embedded Web Server, do one of the following:

    • Click Settings > Cloud Services > Cloud Services Enrollment.
    • Click Settings > Lexmark Cloud Services > Cloud Fleet Management.

    Note:  To make the Cloud Services Enrollment option available, click Security > Device Management > Cloud Services Enrollment.

  2. Select Enable communication with Lexmark Cloud Services, and then click Refresh.

  3. Click Get Enrollment Code, and then take note of the code.

  4. From the Fleet Management web portal, do one of the following:

    • Click Use Native Agent > Enroll Printer, enter the enrollment code, and then click Enroll Printer.
    • Click Agents > Native Agents > Enroll Printer, enter the enrollment code, and then click Enroll Printer.
Was this article helpful?


Related content

Top