Loading the multipurpose feeder

Open the multipurpose feeder.

Adjust the guide to match the size of the paper that you are loading.

Flex, fan, and align the paper edges before loading.

Load paper with the printable side faceup.

• Load letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher	With an optional staple finisher
One‑sided printing	One‑sided printing
Two‑sided printing	Two‑sided printing

• When loading prepunched paper, make sure that the holes on the long edge of the paper are against the right side of the paper guide.

One‑sided printing	Two‑sided printing

• Load envelopes with the flap side down and against the left side of the paper guide.

Warning—Potential Damage:  Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives.

From the control panel, set the paper size and paper type to match the paper loaded.