Skip to Content Information Center
Lexmark MS825

Lexmark MS825

Staple jam in the staple, hole punch finisher

  1. Depending on the staple jam location, open either door F or door G.

  2. Remove the staple cartridge holder.

  3. Remove the loose staples.

  4. Press the staples against the metal bracket.

    Note:  If the staples are at the rear of the cartridge, then shake the cartridge downward to bring the staples near the metal bracket.

  5. Insert the staple cartridge holder until it clicks into place.

  6. Close the door.

Updated December 2017
Was this article helpful?
Top