Skip to Content Information Center
Lexmark MS825

Lexmark MS825

Text or images cut off

Note:  Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to navigate through the settings.

ActionYesNo

Step 1

  1. Check if the printer is using a genuine and supported Lexmark toner cartridge.

    Note:  If the toner cartridge is not supported, then install a supported one.

  2. Print the document.

Are text or images cut off?

Go to step 2.

The problem is solved.

Step 2

  1. Remove, and then insert the imaging unit.

    Warning—Potential Damage:  Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

    Warning—Potential Damage:  Do not touch the photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs.

  2. Print the document.

Are text or images cut off?

Go to step 3.

The problem is solved.

Step 3

  1. Remove the imaging unit.

    Warning—Potential Damage:  Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

    Warning—Potential Damage:  Do not touch the photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs.

  2. Remove any packing material that is stuck on the imaging unit.

    Note:  Make sure to remove any obstruction between the charge roller and photoconductor drum.

  3. Insert the imaging unit.

  4. Print the document.

Are text or images cut off?

Go to step 4.

The problem is solved.

Step 4

  1. Replace the imaging unit.

  2. Print the document.

Are text or images cut off?

Contact customer support.

The problem is solved.

Updated August 2017
Was this article helpful?
Top