Skip to Content Information Center
Lexmark MX722

Lexmark MX722

Setting up Card Copy

Note:  This application is supported only in some printer models. For more information, see Supported applications.

  1. Open a web browser, and then type the printer IP address in the address field.


    • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.
  2. Click Apps > Card Copy > Configure.


    • Make sure that Display Icon is enabled.
    • Make sure that E‑mail Settings and Network Share Settings are configured.
    • When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and 400 dpi for black and white.
    • When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color and 300 dpi for black and white.
    • You need a printer hard disk to scan multiple cards.
  3. Apply the changes.

Was this article helpful?