Skip to Content Information Center
Lexmark MX725

Lexmark MX725

Loading the multipurpose feeder

  1. Open the multipurpose feeder.

  2. Adjust the guide to match the size of the paper that you are loading.

  3. Flex, fan, and align the paper edges before loading.

  4. Load paper with the printable side faceup.

    • When loading letterhead, do either of the following:
    • One‑sided printingTwo‑sided printing
    • When loading prepunched paper, make sure that the holes on the long edge of the paper are against the right side of the paper guide.
    • One‑sided printingTwo‑sided printing
    • Load envelopes with the flap side down and against the left side of the paper guide.
    • Warning—Potential Damage:  Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives.

  5. From the control panel, set the paper size and paper type to match the paper loaded.

Was this article helpful?