Skip to Content Information Center
Lexmark C2425

Lexmark C2425

Not your product?

Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)

Before you begin, make sure that:

  • The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter is installed in your printer. For more information, see the instructions that came with the adapter.

    Using the Push Button method

  1. From the control panel, navigate to:

    Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

    For non-touch-screen printer models, press to navigate through the settings.

  2. Follow the instructions on the display.

    Using the personal identification number (PIN) method

  1. From the control panel, navigate to:

    Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start PIN Method

    For non-touch-screen printer models, press to navigate through the settings.

  2. Copy the eight‑digit WPS PIN.

  3. Open a Web browser, and then type the IP address of your access point in the address field.

    Notes:

    • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.

  4. Access the WPS settings. For more information, see the documentation that came with your access point.

  5. Enter the eight‑digit PIN, and then save the changes.
Was this article helpful?


Related content

Top