- [List of available fonts] (Courier*)
Select a font from the specified font source.
- [List of available symbol set] (10U PC‑8*)
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text.
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed‑space characters in a horizontal inch of type.
- Reverse Portrait
- Reverse Landscape
Specify the orientation of text and graphics on the page.
Specify the number of lines of text for each page printed through the PCL®
- This menu item activates vertical escapement that causes the selected number of requested lines to print between the default margins of the page.
- 60 is the U.S. factory default setting. 64 is the international factory default setting.
PCL5 Minimum Line Width
- 1–30 (2*)
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the value.
PCLXL Minimum Line Width
- 1–30 (2*)
Set the width of the logical page on A4‑size paper.
Note: Logical page is the space on the physical page where data is printed.
Set the printer to perform a carriage return after a line feed control command.
Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control command.
- Assign Tray [x]
- Assign Manual Paper
- Assign Manual Envelope
Configure the printer to work with print drivers or applications that use different source assignments for the paper source.
- View Factory Defaults
Show the factory default setting assigned for each paper source.
- Restore Defaults
Return all tray assignments to factory default values.
- Enabled* 
Set the printer to end a print job after it has been idle for the specified amount of time in seconds.
Note: Print Timeout Time appears only in some printer models.
Print Timeout Time
- 1–255 (90*)