Setup Using Mobile App | Configure the wireless connection using the Lexmark Mobile Assistant app. |
Setup On Printer Panel - Choose Network
- Add Wi‑Fi Network
- Network Name
- Network Mode
- Wireless Security Mode
- Disabled*
- WEP
- WPA2/WPA - Personal
- WPA2 - Personal
| Determine the wireless network that the printer connects to. Note: This menu item appears as Wireless Connection Setup in the Embedded Web Server. |
Wi‑Fi Protected Setup - Start Push Button Method
- Start PIN Method
| Establish a wireless network and enable network security. Notes: - Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given time.
- Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.
|
Compatibility - 802.11b/g/n (2.4GHz)
- 802.11a/b/g/n/ac (2.4GHz/5GHz)*
- 802.11a/n/ac (5GHz)
| Specify the wireless standard for the wireless network. |
Wireless Security Mode - Disabled*
- WEP
- WPA2/WPA-Personal
- WPA2-Personal
- 802.1x - RADIUS
| Set the type of security for connecting the printer to wireless devices. |
WEP Authentication Mode - Auto*
- Open
- Shared
| Set the type of Wireless Encryption Protocol (WEP) used by the printer. Note: This menu item appears only if Wireless Security Mode is set to WEP. |
Set WEP Key | Specify a WEP password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WEP. |
| Enable wireless security through WPA2. Note: This menu item appears only if Wireless Security Mode is set to WPA2-Personal. |
Set PSK | Set the password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal or WPA2‑Personal. |
| Enable wireless security through WPA2/WPA. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal. |
802.1x Encryption Mode - WPA+
- WPA2*
| Enable wireless security through 802.1x standard. Note: This menu item appears only if Wireless Security Mode is set to 802.1x - Radius. |
| Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information dynamically to clients. |
IPv4 - Set Static IP Address
| Set the static IP address of your printer. |
| Enable IPv6 in the printer. |
| Enable DHCPv6 in the printer. |
IPv6 - Stateless Address Autoconfiguration
| Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. |
| Specify the DNS server address. |
IPv6 - Manually Assigned IPV6 Address
| Assign the IPv6 address. Note: This menu item appears only in some printer models. |
IPv6 - Manually Assigned IPV6 Router
| Assign the IPv6 router address. Note: This menu item appears only in some printer models. |
| Specify the address prefix. |
| Show all IPv6 addresses. |
IPv6 - All IPv6 Router Addresses
| Show all IPv6 router addresses. |
| View the network addresses. |
| Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. |
| Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. |
| Set the printer to process Macintosh binary PostScript print jobs. Notes: - On processes raw binary PostScript print jobs.
- Off filters print jobs using the standard protocol.
|