Lexmark XC2326
Note: An asterisk (*) next to a value indicates the factory default setting.
USB Configuration
Change the USB driver mode of the printer to improve its compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB Simple device (single interface) or as a USB Composite device (multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed capabilities.
Tray Configuration
Set the printer to link the trays that have the same paper type and paper size settings.
Note: This menu item is available only in some printer models.
Display a message to select paper size and type after inserting the tray.
Specify the page orientation when loading A5 paper size.
Set the paper source that the user fills when a prompt to load paper appears.
Set the paper source that the user fills when a prompt to load envelope appears.
Set the printer to resolve paper- or envelope-related change prompts.
Reports
Print reports about printer menu settings, status, and event logs.
Supply Usage And Counters
Reset the supply usage history, such as number of pages and days remaining, to the factory shipped level.
Reset the counter after installing a new supply.
Printer Emulations
Set the printer to recognize and use the PPDS data stream.
Set the printer to recognize and use the PS data stream.
Set the page timeout during emulation.
Reset the emulator after a print job.
Disable access to the printer message during emulation.
Fax Configuration
Set fax to enter Sleep mode whenever the printer determines that it should.
Print Configuration
Print color content in grayscale.
Enhance the printed output to compensate for misregistration in the printer.
Set a text point-size value below which the high‑frequency screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens.
Device Operations
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the printer performance.
Enable access to the control panel menus.
Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues.
For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing.
Erase user‑defined strings for the Default or Alternate custom messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting.
Toner patch sensor setup
Set the default calibration frequency.
Run the full color calibration.
Print a diagnostic page that contains toner patch sensor calibration.
Scanner Configuration
Print a Quick Test target page.
Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins may need to be reset.
Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board.
Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job.
Disable the scanner when it is not working properly.
Set the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.
Use the printer settings to monitor supplies, reduce printing costs, secure documents, and a lot more.
Keep a copy of this page to check the current printer settings and locate items in the printer menu system.