Skip to Content Information Center
Lexmark CX431

Lexmark CX431


Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Display Language

  • [List of languages]

Set the language of the text that appears on the display.


  • [List of countries or regions]

Identify the country or region where the printer is configured to operate.

    Run initial setup

  • No*
  • Yes

Run the setup wizard.


  • Keyboard Type
    • [List of languages]

Select a language as a keyboard type.

Note:  All the Keyboard Type values may not appear or may require special hardware to appear.

    Displayed information

  • Display Text 1 (IP Address*)
  • Display Text 2 (Date/Time*)
  • Custom Text 1
  • Custom Text 2

Specify the information to appear on the home screen.

    Date and Time

  • Configure
    • Current Date and Time
    • Manually Set Date and Time
    • Date Format (MM‑DD‑YYYY*)
    • Time Format (12 hour A.M./P.M.*)
    • Time Zone

Configure the printer date and time.

    Date and Time

  • Network Time Protocol
    • Enable NTP (On*)
    • NTP Server
    • Enable Authentication

Configure the settings for Network Time Protocol (NTP).

Note:  When Enable Authentication is set to MD5 key, Key ID and Password appear.

    Paper Sizes

  • U.S.*
  • Metric

Specify the unit of measurement for paper sizes.

Note:  The country or region selected in the initial setup wizard determines the initial paper size setting.

    Screen Brightness

  • 20–100% (100*)

Adjust the brightness of the display.

    Flash Drive Access

  • Disabled
  • Enabled*

Enable access to the flash drive.

    One Page Flatbed Scanning

  • On
  • Off*

Set copies from the scanner glass to only one page at a time.

    Screen Timeout

  • 5–300 (60*)

Set the idle time in seconds before the display shows the home screen, or before the printer logs out a user account automatically.

Was this article helpful?