Note: An asterisk (*) next to a value indicates the factory default setting.
Change the USB driver mode of the printer to improve its compatibility with a personal computer.
Set the USB port to run at full speed and disable its high‑speed capabilities.
Set the printer to link the trays that have the same paper type and paper size settings.
Display a message to select paper size and type after inserting the tray.
Specify the page orientation when loading A5 paper size.
Set the paper source that the user fills when a prompt to load paper appears.
Set the paper source that the user fills when a prompt to load envelope appears.
Set the printer to resolve paper- or envelope-related change prompts.
Print reports about printer menu settings, status, and event logs.
Supply Usage And Counters
Reset the supply page counter or view the total printed pages.
Set the printer to recognize and use the PS data stream.
Set the page timeout during emulation.
Reset the emulator after a print job.
Disable access to the printer message during emulation.
Set a text point-size value below which the high‑frequency screens are used when printing font data.
Adjust the toner density when printing documents.
Set the printer to reduce the amount of noise that it makes when printing.
Note: Enabling this setting slows down the overall performance of the printer.
Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues.
For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing.
Note: This setting cannot be used when the tray is not fully inserted or the tray sensor is damaged.
Erase all custom messages.
Use the printer settings to monitor supplies, reduce printing costs, secure documents, and a lot more.
Print this page to check the current printer settings and locate items in the printer menu system.