Skip to Content Information Center
Lexmark B3442

Lexmark B3442

Ethernet

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Network Speed

Show the speed of an active network adapter.

    IPv4

  • Enable DHCP
    • On*
    • Off

Enable Dynamic Host Configuration Protocol (DHCP).

Note:  DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information to clients in a dynamic manner.

    IPv4

  • Set Static IP Address
    • IP Address
    • Netmask
    • Gateway

Set the static IP address of your printer.

    IPv6

  • Enable IPv6
    • On*
    • Off

Enable IPv6 in the printer.

    IPv6

  • Enable DHCPv6
    • Off*
    • On

Enable DHCPv6 in the printer.

    IPv6

  • Stateless Address Autoconfiguration
    • On*
    • Off

Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.

    IPv6

  • DNS Address

Specify the DNS server address.

    IPv6

  • Address Prefix
    • 0–128 (64*)

Specify the address prefix.

    IPv6

  • All IPv6 Addresses

Show all IPv6 addresses.

    IPv6

  • All IPv6 Router Addresses

Show all IPv6 router addresses.

    Network Address

  • UAA
  • LAA

Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA).

Note:  You can change the printer LAA manually.

    PCL SmartSwitch

  • On*
  • Off

Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language.

Note:  If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

    PS SmartSwitch

  • On*
  • Off

Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language.

Note:  If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

    Mac Binary PS

  • Auto*
  • On
  • Off

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.

    Energy Efficient Ethernet

  • Auto*
  • On
  • Off

Reduce power consumption when the printer does not receive data from the Ethernet network.

Was this article helpful?
Top