Skip to Content Information Center
Lexmark B3442

Lexmark B3442

TCP/IP

Note:  This menu appears only in network printers or printers that are attached to print servers.

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Set Hostname

Set the current TCP/IP host name.

    Allow DHCP/BOOTP to update NTP server

  • On*
  • Off

Allow the DHCP and BOOTP clients to update the NTP settings of the printer.

    Enable Auto IP

  • On*
  • Off

Assign an IP address automatically.

    DNS Address

Specify the current Domain Name System (DNS) server address.

    Backup DNS

Specify the backup DNS server addresses.

    Backup DNS 2

    Backup DNS 3

    Enable DDNS

  • Off*
  • On

Update the Dynamic DNS settings.

    DDNS TTL

Specify the current DDNS settings.

    Default TTL

    DDNS Refresh Time

    Enable mDNS

  • On*
  • Off

Update multicast DNS settings.

    WINS Address

Specify a server address for Windows Internet Name Service (WINS).

    Enable BOOTP

  • On
  • Off*

Allow the BOOTP to assign a printer IP address.

    MTU

Specify a maximum transmission unit (MTU) parameter for the TCP connections.

    Raw Print Port

  • 1–65535 (9100*)

Specify a raw port number for printers connected on a network.

    Outbound Traffic Maximum Speed

  • On
  • Off*

Enable the printer maximum transfer rate.

    Enable TLSv1.0

  • On*
  • Off

Enable the TLSv1.0 protocol.

    Enable TLSv1.1

  • On*
  • Off

Enable the TLSv1.1 protocol.

    SSL Cipher List

Specify the cipher algorithms to use for the SSL or the TLS connections.

Was this article helpful?
Top