Skip to Content Information Center
Lexmark B3340

Lexmark B3340

Not your product?

Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)

Note:  This feature is available only in some printer models.

Before you begin, make sure that:

  • The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter is installed in your printer. For more information, see the instructions that came with the adapter.
  • Make sure that Active Adapter is set to Auto. From the control panel, navigate to:
  • Settings >  > Network/Ports >  > Network Overview >  > Active Adapter >  > Auto > 

    Using the Push Button method

  1. From the control panel, navigate to:

    Settings >  > Network/Ports >  > Wireless >  > Wi‑Fi Protected Setup >  > Start Push Button Method > 

  2. Follow the instructions on the display.

    Using the personal identification number (PIN) method

  1. From the control panel, navigate to:

    Settings >  > Network/Ports >  > Wireless >  > Wi‑Fi Protected Setup >  > Start PIN Method > 

  2. Copy the eight‑digit WPS PIN.

  3. Open a web browser, and then type the IP address of your access point in the address field.

    Notes:

    • To know the IP address, see the documentation that came with your access point.
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.

  4. Access the WPS settings. For more information, see the documentation that came with your access point.

  5. Enter the eight‑digit PIN, and then save the changes.
Was this article helpful?


Related content

Top