Skip to Content Information Center
Lexmark B3340

Lexmark B3340

Configuring Wi‑Fi Direct

Note:  This feature is available only in some printer models.

Wi-Fi Direct® is a Wi-Fi-based peer-to-peer technology that allows wireless devices to connect directly to a Wi-Fi Direct‑enabled printer without using an access point (wireless router).

  1. From the control panel, navigate to:

    Settings >  > Network/Ports >  > Wi-Fi Direct > 

  2. Configure the settings.

    • Enable Wi‑Fi Direct—Enables the printer to broadcast its own Wi‑Fi Direct network.
    • Wi‑Fi Direct Name—Assigns a name for the Wi‑Fi Direct network.
    • Wi‑Fi Direct Password—Assigns the password for negotiating the wireless security when using the peer‑to-peer connection.
    • Show Password on Setup Page—Shows the password on the Network Setup Page.
    • Auto-Accept Push Button Requests—Lets the printer accept connection requests automatically.
    • Note:  Accepting push‑button requests automatically is not secured.

Was this article helpful?
Top