Skip to Content Information Center
Lexmark B3442

Lexmark B3442

TCP/IP

Note:  This menu appears only in network printers or printers attached to print servers.

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Set Hostname

Set the current TCP/IP host name.

    Domain Name

Set the domain name.

Note:  This menu item appears only in the Embedded Web Server.

    Allow DHCP/BOOTP to update NTP server

  • On*
  • Off

Allow the DHCP and BOOTP clients to update the NTP settings of the printer.

    Zero Configuration Name

Specify a service name for the zero configuration network.

Note:  This menu item appears only in the Embedded Web Server.

    Enable Auto IP

  • On*
  • Off

Assign an IP address automatically.

    DNS Address

Specify the current Domain Name System (DNS) server address.

    Backup DNS

Specify the backup DNS server addresses.

    Backup DNS 2

    Backup DNS 3

    Domain Search Order

Specify a list of domain names to locate the printer and its resources that reside in different domains on the network.

Note:  This menu item appears only in the Embedded Web Server.

    Enable DDNS

  • Off*
  • On

Update the Dynamic DNS settings.

    DDNS TTL

Specify the current DDNS settings.

    Default TTL

    DDNS Refresh Time

    Enable mDNS

  • On*
  • Off

Update multicast DNS settings.

    WINS Address

Specify a server address for Windows Internet Name Service (WINS).

    Enable BOOTP

  • Off*
  • On

Allow the BOOTP to assign a printer IP address.

    Restricted Server List

Specify an IP address for the TCP connections.

Notes:

  • This menu item appears only in the Embedded Web Server.
  • Use a comma to separate each IP address.
  • You can add up to 50 IP addresses.

    Restricted Server List Options

  • Block All Ports*
  • Block Printing Only
  • Block Printing and HTTP Only

Specify how the IP addresses in the list can access the printer functionality.

Note:  This menu item appears only in the Embedded Web Server.

    MTU

Specify a maximum transmission unit (MTU) parameter for the TCP connections.

    Raw Print Port

  • 1–65535 (9100*)

Specify a raw port number for printers connected on a network.

    Outbound Traffic Maximum Speed

  • Disabled*
  • Enabled

Enable the printer maximum transfer rate.

    Enable TLSv1.0

  • On*
  • Off

Enable the TLSv1.0 protocol.

    Enable TLSv1.1

  • On*
  • Off

Enable the TLSv1.1 protocol.

    SSL Cipher List

Specify the cipher algorithms to use for the SSL or the TLS connections.

Was this article helpful?
Top