Skip to Content Information Center
Lexmark MX431

Lexmark MX431

Notifications

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    ADF Loaded Beep

  • Off
  • On*

Enable a sound when loading paper into the ADF.

    Alarm Control

  • Off
  • Single*
  • Continuous

Set the number of times that the alarm sounds when the printer requires user intervention.

    Supplies

  • Show Supply Estimates
    • Show estimates*
    • Do not show estimates

Show the estimated status of the supplies.

    Supplies

  • Cartridge Alarm
    • Off*
    • Single
    • Continuous

Set the number of times that the alarm sounds when the cartridge is low.

    E‑mail Alerts Setup

  • E‑mail Setup
    • Primary SMTP Gateway
    • Primary SMTP Gateway Port (25*)
    • Secondary SMTP Gateway
    • Secondary SMTP Gateway Port (25*)
    • SMTP Timeout (30 seconds*)
    • Reply Address
    • Always use SMTP default Reply Address(Off*)
    • Use SSL/TLS(Disabled*)
    • Require Trusted Certificate(On*)
    • SMTP Server Authentication(No authentication required*)
    • Device‑Initiated E‑mail(None*)
    • Device Userid
    • Device Password
    • NTLM Domain
    • Disable “SMTP server not set up” error(Off*)

Configure the e‑mail settings of the printer.

    Error Prevention

  • Jam Assist
    • Off
    • On*

Set the printer to check for jammed paper automatically.

    Error Prevention

  • Auto Continue
    • Disabled
    • Enabled* (5 seconds)
  • Auto Continue Time

Let the printer continue processing or printing a job automatically after clearing certain attendance conditions.

    Error Prevention

  • Auto Reboot
    • Auto Reboot (Reboot always*)

Set the printer to restart when an error occurs.

    Error Prevention

  • Auto Reboot
    • Max Auto Reboots (2*)

Set the number of automatic reboots that the printer can perform.

    Error Prevention

  • Auto Reboot
    • Auto Reboot Window (720*)

Set the number of seconds before the printer performs an automatic reboot.

    Error Prevention

  • Auto Reboot
    • Auto Reboot Counter

Show a read‑only information of the reboot counter.

    Error Prevention

  • Display Short Paper Error
    • On
    • Auto‑clear*

Set the printer to show a message when a short paper error occurs.

Note:  Short paper refers to the size of the paper loaded.

    Error Prevention

  • Page Protect
    • Off*
    • On

Set the printer to process the entire page into the memory before printing it.

    Jam Content Recovery

  • Jam Recovery
    • Off
    • On
    • Auto*

Set the printer to reprint jammed pages.

    Jam Content Recovery

  • Scanner Jam Recovery
    • Job level
    • Page level*

Specify how to restart a scan job after resolving a paper jam.

Was this article helpful?
Top