Skip to Content Information Center
Lexmark MX331

Lexmark MX331

Not your product?

FTP Defaults

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Format

  • PDF (.pdf)*
  • TIFF (.tif)
  • JPEG (.jpg)

Specify the file format for the scanned image.

    PDF Settings

  • PDF Version (1.5*)
  • Archival Version (A‑1a*)
  • Secure (Off*)
  • Archival (PDF/A) (Off*)

Configure the PDF settings for the scanned image.

Note:  Archival Version and Archival (PDF/A) are supported only when PDF Version is set to 1.4.

    Content Type

  • Text
  • Text/Photo*
  • Graphics
  • Photo

Improve the output result based on the content type of the original document.

    Color

  • Black and White
  • Gray
  • Color*

Set the printer to capture file content in color or in mono.

    Resolution

  • 75 dpi
  • 150 dpi*
  • 200 dpi
  • 300 dpi
  • 400 dpi
  • 600 dpi

Set the resolution of the scanned image.

    Darkness

  • 1–9 (5*)

Adjust the darkness of the scanned image.

    Orientation

  • Portrait*
  • Landscape

Specify the orientation of the original document.

    Original Size

  • Mixed Sizes*

Set the paper size of the original document.

    File Name

Specify the file name of the scanned image.

Advanced Imaging
Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Color Balance

  • Cyan ‑ Red (0*)
  • Magenta ‑ Green (0*)
  • Yellow ‑ Blue (0*)

Adjust the color intensity for cyan, magenta, and yellow.

    Contrast

  • Best for content*
  • 0–5

Specify the contrast for the scanned image.

    Background Removal

  • Level (0*)

Remove the background color or image noise from the original document.

    Scan Edge to Edge

  • On
  • Off*

Allow edge‑to‑edge scanning of the original document.

Admin Controls
Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Text Default

  • 5–95 (75*)

Set the quality of text on the scanned image.

    Text/Photo Default

  • 5–95 (75*)

Set the quality of text and photo on the scanned image.

    Photo Default

  • 5–95 (50*)

Set the quality of photo on the scanned image.

    Transmission Log

  • Print Log*
  • Do Not Print Log
  • Print Only For Error

Print a transmission log for FTP scans.

    Log Paper Source

  • Tray [x] (1*)
  • MP Feeder

Specify the paper source for printing FTP logs.
Was this article helpful?


Related content

Top