Skip to Content Information Center
Lexmark MX331

Lexmark MX331

Not your product?

Copy Defaults

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Content Type

  • Text
  • Text/Photo*
  • Photo
  • Graphics

Improve the output result based on the content of the original document.

    Sides

  • 1 sided to 1 sided*
  • 1 sided to 2 sided

Specify the scanning behavior based on the original document.

    Pages per Side

  • Off*
  • 2 Portrait pages
  • 4 Portrait pages
  • 2 Landscape pages
  • 4 Landscape pages

Specify the number of page images to print on one side of a sheet of paper.

    Print Page Borders

  • On
  • Off*

Place a border around each image when printing multiple pages on a single page.

    Collate

  • Off [1,1,1,2,2,2]
  • On [1,2,1,2,1,2]*

Print multiple copies in sequence.

    “Copy from” Size

[List of paper sizes]

Set the paper size of the original document.

Note:  Letter is the U.S. factory default setting. A4 is the international factory default setting.

    “Copy to” Source

  • Tray [x] (1*)
  • MP Feeder
  • Auto Size Match

Specify the paper source for the copy job.

    Darkness

  • 1 to 9 (5*)

Adjust the darkness of the scanned image.

    Number of Copies

  • 1–9999 (1*)

Specify the number of copies.

Advanced Imaging
Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Contrast

  • Best for Content*
  • 0–5

Specify the contrast of the output.

    Background Removal

  • Level
    • ‑4 to 4 (0*)

Adjust the amount of background visible on a scanned image.

    Scan Edge to Edge

  • On
  • Off*

Allow edge‑to‑edge scanning of the original document.

Admin Controls
Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Allow Save as Shortcut

  • On*
  • Off

Save custom copy settings as shortcuts.
Was this article helpful?


Related content

Top