Config Menu

USB Configuration

• USB PnP
• 1*
• 2

Change the USB driver mode of the printer to improve its compatibility with a personal computer.

USB Configuration

• USB Scan to Local
• On*
• Off

Set whether the USB device driver enumerates as a USB Simple device (single interface) or as a USB Composite device (multiple interfaces).

USB Configuration

• USB Speed
• Full
• Auto*

Set the USB port to run at full speed and disable its high‑speed capabilities.

Tray Configuration

• Show Tray Insert Message
• Off
• Only for unknown sizes*
• Always

Show message about the tray status.

Tray Configuration

• A5 Loading
• Short Edge
• Long Edge*

Specify the page orientation when loading A5 paper size.

Tray Configuration

• Paper Prompts
• Auto*
• Manual Paper

Set the paper source that the user fills when a prompt to load paper appears.

Tray Configuration

• Envelope Prompts
• Auto*
• Manual Envelope

Set the paper source that the user fills when a prompt to load envelope appears.

Tray Configuration

• Action for Prompts
• Prompt user*
• Continue
• Use current

Set the printer to resolve paper- or envelope-related change prompts.

Reports

• Menu Settings Page
• Event Log
• Event Log Summary

Print reports about printer menu settings, status, and event logs.

Supply Usage And Counters

• Clear Supply Usage History

Reset the supply page counter or view the total printed pages.

Printer Emulations

• PS Emulation
• Off*
• On

Set the printer to recognize and use the PS data stream.

Note:  This menu item appears only in some printer models.

Printer Emulations

• Emulator Security
• Page Timeout (60*)

Set the page timeout during emulation.

Printer Emulations

• Emulator Security
• Reset Emulator After Job (Off*)

Reset the emulator after a print job.

Printer Emulations

• Emulator Security
• Disable Printer Message Access (On*)

Disable access to the printer message during emulation.

Fax Configuration

• Fax Low Power Support
• Disable Sleep
• Permit Sleep
• Auto*

Specify the printer power setting when it is in fax mode.

Print Configuration

• Font Sharpening
• 0–150 (24*)

Set a text point-size value below which the high‑frequency screens are used when printing font data.

Print Configuration

• Print Density
• Disabled
• 1–5 (3*)
• Copy Density
• Disabled
• 1–5 (3*)

Adjust the toner density when printing or copying documents.

Device Operations

• Quiet Mode
• On
• Off*

Set the printer to reduce the amount of noise that it makes when printing.

Note:  Enabling this setting slows down the overall performance of the printer.

Device Operations

• Panel Menus
• Enable*
• Disable

Set the printer to enable access to the control panel menus.

Note:  This menu item appears only in the Embedded Web Server.

Device Operations

• Clear Custom Status

Erase all custom messages.

Device Operations

• Clear all remotely‑installed messages

Erase messages that were remotely installed.

Device Operations

• Automatically Display Error Screens
• On*
• Off

Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting.

Note:  This menu item appears only in some printer models.

Scanner Configuration

• Scanner Manual Registration
• Print Quick Test

Print a Quick Test target page.

Note:  Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins may need to be reset.

Scanner Configuration

• Scanner Manual Registration
• Front ADF Registration
• Flatbed Registration

Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board.

Scanner Configuration

• Edge Erase
• ADF Edge Erase
• 0–6 (3*)
• Flatbed Edge Erase
• 0–6 (3*)

Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job.

Scanner Configuration

• Disable Scanner
• Enabled*
• Disabled
• ADF Disabled

Disable the scanner if it is not working properly.

Scanner Configuration

• Tiff Byte Order
• CPU Endianness*
• Little Endian
• Big Endian

Set the byte order of a TIFF‑formatted scan output.

Scanner Configuration

• Exact Tiff Rows Per Strip
• On*
• Off

Set the RowsPerStrip tag value of a TIFF‑formatted scan output.