Skip to Content Information Center
Lexmark MB2236

Lexmark MB2236

Selecting a location for the printer

  • Leave enough room to open trays, covers, and doors and to install hardware options.
  • Set up the printer near an electrical outlet.
  • Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer:
    • Clean, dry, and free of dust
    • Away from stray staples and paper clips
    • Away from the direct airflow of air conditioners, heaters, or ventilators
    • Free from direct sunlight and humidity extremes
  • Observe the recommended temperatures and avoid fluctuations.
  • Ambient temperature

    10 to 32.2°C (50 to 90°F)

    Storage temperature

    -40 to 43.3°C (-40 to 110°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
  • 1

    Top

    360 mm (14 in.)

    2

    Rear

    260 mm (10 in.)

    3

    Right side

    200 mm (8 in.)

    4

    Front

    550 mm (22 in.)
    The minimum space needed in front of the printer is 76 mm (3 in.).

    5

    Left side

    200 mm (8 in.)
Was this article helpful?
Top