Open door B.
Remove the waste toner bottle.
Note: To avoid spilling the toner, place the bottle in an upright position.
Remove the toner cartridges.
Disconnect the imaging kit cable.
Remove the used imaging kit.
Remove the black imaging unit.
Warning—Potential Damage: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the shiny photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs.
Unpack the new imaging kit.
Note: The imaging kit includes the imaging kit and the cyan, magenta, and yellow developer units.
Insert the black imaging unit into the new imaging kit.
Insert the new imaging kit.
Connect the imaging kit cable.
Insert the waste toner bottle.
Insert the toner cartridges.
Close door B.