Skip to Content Information Center
Lexmark CX930

Lexmark CX930

Not your product?

Cleaning the ADF roller kit

  1. Turn off the printer.

  2. Open the ADF top cover.

  3. Remove the separator roller cover.

  4. Remove the separator roller.

  5. Apply water to a soft, lint-free cloth, and then wipe the roller kit.

  6. Insert the separator roller.

  7. Insert the separator roller cover until it clicks into place.

  8. Remove the separator roller assembly.

  9. Apply water to a soft, lint-free cloth, and then wipe the roller kit.

  10. Insert the separator roller assembly until it clicks into place.

  11. Close the ADF top cover.

  12. Turn on the printer.
Was this article helpful?


Related content

Top