Loading the multipurpose feeder

1. Open the multipurpose feeder.

   


2. Adjust the side guides to match the size of the paper that you are loading.

   


3. Flex, fan, and align the paper edges before loading.

   


4. Load the paper.

   Note:  Make sure that the side guides fit snugly against the paper.

   For long-edge feed:

   • For one-sided printing, load letterhead facedown with the header toward the rear of the printer. Load prepunched paper facedown with the holes to the right side of the paper.
   
   • For two-sided printing, load letterhead faceup with the header toward the rear of the printer. Load prepunched paper faceup with the holes to the left side of the paper.
   

   For short-edge feed:

   • For one-sided printing, load letterhead facedown with the header to the left side of the paper. Load prepunched paper facedown with the holes toward the front of the printer.
   
   • For two-sided printing, load letterhead faceup with the header to the left side of the paper. Load prepunched paper faceup with the holes toward the back of the printer.
   

Note:  When a finisher is installed, the printer rotates the images to 180°.