CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Turn off the printer.
Unplug the power cord from the electrical outlet, and then from the printer.
Unpack the optional spacer, and then remove all the packing material.
Lock the casters to keep the spacer from moving.
Remove the option installation cover under the left side of the printer.
Pull out the lifting handle on the left side of the printer.
Align the printer with the spacer, and then lower the printer into place.
CAUTION—POTENTIAL INJURY: If the printer weight is greater than 20 kg (44 lb), then it may require two or more people to lift it safely.
Remove tray 2.
Secure the spacer to the printer with screws.
Insert tray 2.
Remove the connector cover from the rear of the printer.
Secure the locking bracket to the printer, and then attach the cover.
Adjust the levelers to make sure that all sides of the printer have the same height.
Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Turn on the printer.