Units of Measure - Inches
- Millimeters
| Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. |
Portrait Width - 3.5–52 inches (8.5*)
- 89–1321 mm (216*)
| Set the portrait width of the universal paper. |
Portrait Height - 3.5–52 inches (14*)
- 89–1321 mm (356*)
| Set the portrait height of the universal paper. |
Feed Direction - Short Edge*
- Long Edge
| Set the printer to pick paper from the short edge or long edge direction. Note: Long Edge appears only when the longest edge is shorter than the maximum width supported. |
Multiple Universal Sizes - Tray [x]
- Multipurpose Feeder
| Assign a unique dimension for multiple universal sizes that are loaded in each paper source. Note: This setting appears only when enabled in the Device menu. From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray Configuration > Multiple Universal Sizes. |