Skip to Content
Information Center
Centar za informacije
Troubleshooting
Understanding the printer messages
Lexmark MS810de
Nije vaš proizvod?
Pretražite centar za informacije
Kreni
Understanding the printer messages
Cartridge, imaging unit mismatch [41.xy]
Change [paper source] to [custom string] load [orientation]
Change [paper source] to [custom type name] load [orientation]
Change [paper source] to [paper size] load [orientation]
Change [paper source] to [paper type] [paper size] load [orientation]
Check tray [x] connection
Close door or insert cartridge
Close finisher rear door
Close rear door
Configuration change, some held jobs were not restored [57]
Defective flash detected [51]
Disk full [62]
Disk must be formatted for use in this device
Disk near full. Securely clearing disk space.
Empty the hole punch box
Error reading USB drive. Remove USB.
Error reading USB hub. Remove hub.
Incompatible output bin [x] [59]
Insert hole punch box
Insert staple cartridge
Insert Tray [x]
Install bin [x]
Install Tray [x]
Insufficient memory for Flash Memory Defragment operation [37]
Insufficient memory, some Held Jobs were deleted [37]
Insufficient memory, some held jobs will not be restored [37]
Insufficient memory to collate job [37]
Insufficient memory to support Resource Save feature [35]
Load [paper source] with [custom string] [paper orientation]
Load [paper source] with [custom type name] [paper orientation]
Load [paper source] with [paper size] [paper orientation]
Load [paper source] with [paper type] [paper size] [paper orientation]
Load multipurpose feeder with [custom string] [orientation]
Load multipurpose feeder with [custom type name] [orientation]
Load multipurpose feeder with [paper size] [orientation]
Load multipurpose feeder with [paper type] [paper size] [orientation]
Load staples
Memory full [38]
Misfeed cleared, extra sheets in output bin [24y.xx]
Non‑Lexmark [supply type], see User’s Guide [33.xy]
Not enough free space in flash memory for resources [52]
Paper changes needed
Parallel port [x] disabled [56]
Printer had to restart. Last job may be incomplete.
Reattach bin [x]
Reattach bins [x] – [y]
Reinstall missing or unresponsive cartridge [31.xy]
Reinstall missing or unresponsive imaging unit [31.xy]
Remove defective disk [61]
Remove packaging material, [area name]
Remove paper from all bins
Remove paper from bin [x]
Remove paper from [linked set bin name]
Remove paper from standard output bin
Replace maintenance kit, recommended life exceeded [80.xyz]
Replace maintenance kit to resume printing [80.xy]
Replace missing fuser [31.xyz]
Replace unsupported cartridge [32.xy]
Replace unsupported imaging unit [32.xy]
Replace wiper
Restore held jobs?
Serial port [x] disabled [56]
Some held jobs were not restored
Standard network software error [54]
Supply needed to complete job
The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.
Too many bins attached [58]
Too many disks installed [58]
Too many flash options installed [58]
Tray [x] paper size unsupported
Unsupported disk
USB port [x] disabled [56]
Priručnici
Videozapisi s uputama
Specifikacije
Rječnik
Sigurnost, obavijesti i konvencije
Top