Warning—Potential Damage: Remove the waste toner bottle and imaging kit first before removing the isolation unit. Failure to do this can lead to toner spillage and damage to the printer.
Remove the imaging unit.
Remove the media feeder. See Media feeder removal.
Remove the three screws (A) securing the isolation unit.
Remove the biasing screw (B).
Make sure to replace this screw first before replacing the three screws to secure the unit.Disconnect the motor cable (C) and sensor cable (D).
Tilt the right portion of the isolation unit to the front, and then remove the unit.
Route the isolation unit cables out of the printer.