Skip to Content Information Center
Lexmark CX725

Lexmark CX725

Not your product?

Behavioral issues (without error codes) of printers with RFID Option

    The following table details the actual behavior of the printer to every possible RFID setting combinations. To access the RFID menu:

  1. From the home screen, touch Settings.

  2. Select RFID, and then configure the settings.

Note:  If the printer continues to behave inconsistently with the menu settings as indicated below, this may indicate a hardware problem. Contact the next level of support.

Setting combinationActual behavior
Stop on ErrorMark on ErrorRetry Count

Notes:

  • N is any number greater than 0 as specified in the Retry Count setting.
  • We do not recommend using the last two combination of settings. These settings allow unprogrammed or failed tags into the output with no indication of failure.

Yes

Yes

0

(Default) All failed pages will be marked and a 44.01 error will be posted.

Yes

No

0

44.01 error will be posted on all failed pages.

No

Yes

0

Failed pages will be marked, but no 44.01 error will be posted.

Yes

No

Any number greater than 0

Failed page will be reprinted up to N times before 44.01 error is posted. Failed pages will not be marked.

Yes

Yes

Any number greater than 0

Failed pages will be reprinted up to N times. Each failed page will be marked. After N retries, 44.01 error will be posted.

No

Yes

Any number greater than 0

Failed pages will be reprinted up to N times. Each failed page will be marked. After N retries, the printer will move to the next page in the job. 44.01 error will not be posted.

No

No

0

There will be no indication of failed pages.

No

No

Any number greater than 0

A failed page will be reprinted up to N times. Failed pages will not be marked. The printer will resume printing with next page with no error indication after N retries.
Was this article helpful?


Related content

Top