Installing the 2 x 550-sheet tray

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Notes:

• This option must be installed together with an optional 550‑sheet tray. Place the option at the bottom of the configuration.
• If a 550‑sheet tray is already installed, uninstall the tray, remove the tray side cover, remove the lower tray cover, and then place the tray on top of this option.
• This task requires a flat‑head screwdriver.


1. Turn off the printer.

   


2. Unplug the power cord from the electrical outlet, and then from the printer.

   


3. Unpack the 2 x 550‑sheet tray, and then remove all the packing material.



4. Lock the caster to keep the 2 x 550‑sheet tray from moving.

   


5. Align the 550‑sheet tray with the 2 x 550‑sheet tray, and then lower it into place.

   Note:  To avoid damaging the tray, make sure to hold the front and rear sides when lifting the tray.

   


6. Pull out the 550‑sheet tray insert.

   


7. Secure the 550‑sheet tray to the 2 x 550‑sheet tray.

   


8. Insert the 550‑sheet tray insert.

   


9. Secure the rear part of the 550‑sheet tray to the 2 x 550‑sheet tray.

   


10. Remove the cover under the right side of the printer.

    


11. Align the printer with the optional trays, and then lower it into place.

    
    CAUTION—POTENTIAL INJURY:  If the printer weight is greater than 20 kg (44 lb), then it may require two or more people to lift it safely.
    


12. Pull out the standard tray insert.

    


13. Secure the 550‑sheet tray to the printer.

    


14. Insert the standard tray insert.



15. Secure the rear part of the 550‑sheet tray to the printer.

    


16. Connect one end of the power cord to the printer, and then the other end to the electrical outlet.

    
    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.



17. Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.