Installing the 1500‑sheet tray

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Notes:

• Before installing this option, make sure that an optional 550-sheet tray and either of the 2 x 500-sheet tray or 2000-sheet tray are already installed.
• This task requires a flat‑head screwdriver.

Note: 



1. Turn off the printer.

   


2. Unplug the power cord from the electrical outlet, and then from the printer.

   


3. Remove the connection cover.

   Note:  Do not throw away the cover.

   


4. Remove the port cover.

   Note:  Do not throw away the cover.

   


5. Remove the screw caps from the printer.

   Note:  Do not throw away the screw caps.

   


6. Unpack the 1500‑sheet tray, and then remove all the packing material.



7. Install the screws for the mounting bracket.

   


8. Attach the mounting bracket to the printer.

   Note:  Use the mounting bracket and screws that came with the 1500‑sheet tray.

   


9. Install the remaining screws.

   


10. Install the 1500‑sheet tray.

    


11. Connect the tray cable to the printer.

    


12. Attach the tray cable cover.

    


13. Slide the 1500‑sheet tray toward the printer.

    


14. Connect one end of the printer power cord to the printer, and then the other end to the electrical outlet.

    
    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.



15. Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.