Skip to Content Information Center
Lexmark MS823

Lexmark MS823

Image Prints Off the Page


Affected products

Click Properties in the title section above.

What you will see

A print job with a high coverage image (>10% coverage) results in image printing off the bottom of the page.


Step 1. Change the print settings to lighten the print.

Step 2. Increase the bottom margin by going to the printer's Diagnostic Menu (Press **36 from the printer numeric keypad). Then scroll down and navigate through Printer diagnostics & adjusts > Registration adjust and change the Bottom margin value from 3 to a higher number (Perform a test print after changing the value until the desired output is achieved.).

Still need help?

If you need additional assistance, please close this browser tab or go to the Lexmark support site, type your printer model and locate

Get in Touch with Lexmark! for contact information.
When calling for support, you will need the following:

  • Affected printer model/s
  • Printer serial number

Please be near the product/s described in this article to expedite the support process and reduce callbacks.


האם מאמר זה הועיל לך?