Skip to Content Information Center
Scan to OCR

Scan to OCR

Unable to Install Solutions via the Embedded Web Server

What you will see

When installing a .fls file through the embedded web server ( EWS) > Settings > Embedded Solutions > Install, you may encounter either of the following messages:

  • An error occurred while uploading a file.

Click Image to Enlarge

  • The size of the uploaded file exceeds the maximum allowed. One example of this scenario has been seen when trying to install Scan to Sharepoint 2.5.0 via the printer's EWS.


NOTE:
See xref_access_xref to view steps to access printer's EWS.

Affected printers

This issue has been seen on the following Lexmark models, but other models not listed here could be affected:

  • X46x
  • X65x
  • X73x
  • X86x


NOTE:
An x denotes any number within a given printer model series.

Suggested remedy

Before you begin, make sure that the printer has enough storage and/or memory to install a new app. You may check for the available space on the device by going to EWS > Settings > Embedded Solutions > System tab > Info, and then refer to Storage Free space in the Resource section. See xref_FA1023_xref for more details on resource values.

To resolve this issue, install the app using either of the following routes:

Option 1: Install via Update Firmware section on EWS.

StepAction
1 Download the solution or file to a local workstation or computer.
2Extract the solution file (.fls) into a file directory on the computer that is well known or to a directory or folder.
3Go to EWS > Settings > Update Firmware > click on Choose File button to select the .fls file, and then click Submit.

Option 2: Install via File Transfer Protocol ( FTP). To do this:

StepAction
1 Download the solution or file to a local workstation or computer.
2Extract the solution file (.fls) into a file directory on the computer that is well known or to a directory or folder that will be easy to switch to from a command prompt.
3

Open a command prompt on your computer by using either of the following methods:

  • Click Start > Run > type cmd > OK, or
  • Click Start > All Programs > Accessories > Run
4To simplify this procedure, it is recommended that you change drive letters and directories to the exact location of the file using any combination of "

drive letter

:" or " cd" commands.
5Type" ftp < MFP's_IP_Address>", where MFP_IP_Address is the TCP/IP address of the printer.
6 Type bin, and then press Enter to put the session into binary mode.
7 Type " put"< filename>, where filename is the full .fls filename.
8 Press Enter.


NOTE:

I

f you skipped Step 4, then you will need to include the full path to the file name; e.g., put C:\solutions\scanToSharepoint2.5.0.fls.

Explanation

Certain files exceed file-size limits for flash methods using the device's EWS.

Still need help?

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
NOTE:
In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution, problem description, and affected printer models.

Additional information may be requested by the support agent.

LEGACY ID: SO6667

Was this article helpful?
Top