Skip to Content Information Center
Lexmark MS711

Lexmark MS711

Bottom Margins Are Offset when Printing from AS400

What you will see

Printing from AS400 results in the bottom margins being offset and the last line being cut off. Print area is supposed to extend to about 1mm from the bottom edge of each label. Printable area set to Whole Page

Products affected



in the title section above.

Suggested fix and explanation

Set the printable area to full page, which should increase the printable area and allow enough space for the last line to be printed.

To do this from the operator panel, navigate to Settings > Option Card Menu > IPDS Menu > EMULATION > Printable Area, and then change the setting to Full Page.

Printable area set to Full Page

Still need help?

If you require additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark! for contact information.
When calling for support, you will need your printer model/machine type and serial number (SN). Please be near the products described in this article to expedite the support process and reduce call-back situations.


Audience: Lexmark only below

Escalation ID# 464038


Was this article helpful?