Skip to Content Information Center
Lexmark MS312

Lexmark MS312

Shipping and Return Instructions for Lexmark MS310, MS410, MS51x, MS61x, MX310, MX410, MX51x, MX610, XM1145,&XM3145

Overview

If a printer is being returned with the Toner cartridge and Imaging Unit, special precautions need to be taken to prevent damage to the unit. This document outlines the necessary steps to do this.


NOTE:
Packaging tape should be used in the process below. The package of the replacement printer should have sufficient tape to use for this.

Procedure

StepAction
1

Open the front door and push the toner plunger down (A). Keep it in the down position using packaging tape (B).

Click Image to Enlarge
A. Push the toner plunger as directed by the red arrow.B. Tape the toner plunger down.

2

Close front door and tape the door closed. The tape should extend from the multipurpose feeder door in the front (A) around and onto the side covers

(B)

.


Note:
If a replacement printer is received, it should have these tapes installed on it. Use these same tapes for the returned printer.

Click Image to Enlarge
A. Start taping on the area pointed to by the red arrows.B. Wrap the tape around the side cover.

3

Insert the unit into foam with the front of printer in the curved portion of the foam. Install the top foam and tape box closed.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.
NOTE:
When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, xref_HO3864_xref.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

LEGACY ID: HO3891

Was this article helpful?
Top