Skip to Content Information Center
Lexmark MS610dn / MS610dtn

Lexmark MS610dn / MS610dtn

Lexmark MS510 ? Tray Four Option Is Not Available Under the Printer Driver Properties Configuration Tab


The Tray 4 option is not available when navigating through the Printer Properties > Configuration Tab on a Lexmark MS510. This occurs when using specific Universal Printer Driver (UPD) versions; i.e., UPD v2 XL and XL

NOTE:Tray 4 is available with a Lexmark MX510 printer using the same driver version.

See sample illustration below:

Tray 4 Not Available with MS510 via UPD v2 XL

Tray 4 Not Available with MS510 via UPD XL

Tray 4 Available with MX510 via UPD v2 XL

Recommended solution

To resolve this issue, your printer driver needs to be replaced. Please contact Lexmark Technical Support to obtain private builds for these UPD packages.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN).

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.


UPD V2 PCL-XL version filenames

For 32-bit OS…


For 64-bit OS…


Was this article helpful?