Skip to Content Information Center
Lexmark MX410

Lexmark MX410

Lexmark MX51x ? No Power Issue

Issue description

The printer shows signs of not getting power; i.e., front panel LED does not light up and there is no sound of fan or motor turning.

Troubleshooting

  1. Make sure that the power source voltage matches with printer’s voltage requirement (i.e., a 110V printer should be connected to a 110V power outlet).

  2. Check also whether the printer is properly plugged into the wall outlet. Reseat the power cable if necessary.

  3. Try another power outlet. Should the printer not power on even if it is connected to a known good power source, try another power cord.

  4. Remove any printer options installed and see whether the printer itself will power on.

  5. If the preceding suggestions do not resolve the issue or should one of the options be keeping the printer from powering on (Step 4), please contact Lexmark Technical Support.

Contacting Lexmark

If you require additional assistance, please close this window and locate

Get In Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will need your printer model/machine type and serial number (SN). Should you need help locating these, xref_HO3864_xref.

Please be near the products described in this article to expedite the support process and reduce callbacks.

LEGACY ID: TE835

¿Este artículo ha sido útil?
Top