Skip to Content Information Center
Lexmark XM1145

Lexmark XM1145

Toner not fused on Label or Bond media

What you will see

When using Label of Bond media, the toner flakes off the printed page or the page has areas where the toner does not seem to adhere to the paper.

Recommended solution

The toner may have a difficulty adhering to thicker paper such as Label or Bond media. In order to increase bonding or fusing temperature, change the Paper Texture and Paper Weight settings to "Rough/Heavy". To do this, follow the simple steps below.
NOTE:
At this setting, the printer will run at HALF its rated speed.

  • To set to Rough: Select Setting > Paper Menu > Paper Texture > Plain Texture > Rough.
  • To set to Heavy: Select Setting > Paper Menu > Paper Weight > Plain Weight > Heavy.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.
NOTE:
When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

LEGACY ID: SO7164

Was this article helpful?
Top