Skip to Content Information Center
Lexmark CS317

Lexmark CS317

Tray 3 Option Recognized as Tray 2 when Installed on a Lexmark CS310, CS410, CS510, CX310, CX410, or CX510

What you will see

Tray 3 is recognized as Tray 2 when installed on the printer.

You may also notice unusually high skew on printed pages when printing from Tray 2. It can shift as it goes from left to right or the entire text and/or image can be crooked on the page. See sample of a skewed page below.

Click Image to Enlarge

Possible cause

This issue is caused when an incorrect option Tray 2 is installed on the printer. To determine whether the proper option Tray 2 is installed on the printer, check if the option tray has a number “3” on it (see red in the image below) and does not have a Multi-purpose Feeder (MPF). If the tray is labeled with a "3" and and does not have a MPF, then you do not have a valid printer configuration. This Tray 3 / non-MPF configuration may cause large skew on pages printed from the option tray.

Click Image to Enlarge


NOTE:
If the printer has no installed options or a 650-sheet Tray 2 with Multi-purpose Feeder (MPFis installed below the machine and is experiencing skew issues, please see for guidelines on loading paper. The skew in this case is not related to an incorrect tray configuration and may instead be due to improper paper loading. Please follow the regular troubleshooting steps for skew issues.

Option Tray Configuration

The proper printer tray configuration should be one of the configurations shown below:

Single-FunctionMulti-Function
Click Image to EnlargeClick Image to Enlarge

Where:

Single-Function Tray ConfigurationCS310, CS410, CS510 Printers1 650-Sheet Option Tray 2 with a Multi-purpose Feeder (MPF)
CS410, CS510 Printers1 650-Sheet Option Tray 2 with a Multi-purpose Feeder (MPF)2 550-Sheet Option Tray 3
Multi-Function Tray ConfigurationCX310, CX410, CX510 Printers1 650-Sheet Option Tray 2 with a Multi-purpose Feeder (MPF)
CX410, CX510 Printers1 650-Sheet Option Drawer with a Multi-purpose Feeder (MPF)2 550-Sheet Option Tray 3


NOTE:
CS310 and CX310 only support one option tray: the 650-Sheet Option Tray 2 with a Multi-purpose Feeder (MPF).

Recommendation

Check to see whether the printer has the proper option tray installed on the machine. If the tray configuration is incorrect, please get or order the correct option tray(s).

Still Need Help?

If you require additional assistance, please close this window and locate

Get in Touch with Lexmark! for contact information.
NOTE:
When calling for support, you will be asked for your machine/model type and serial number (SN). Should you need help locating your printer's model type and serial number, How to Locate the Serial Number, TLI, Config ID, and Machine Type on a Lexmark CS310, CS410, CS510, CX310, CX410, and CX510.

Please be near the products described in this article to expedite the support process and reduce callbacks.

LEGACY ID: TE648

Was this article helpful?
Top