Skip to Content Information Center
Lexmark XS864

Lexmark XS864

How to Replace the Toner Cartridge on a Lexmark X86xe Multifunction Printer


This article outlines the installation/replacement procedure for the toner cartridge on a Lexmark X86xe MFP.

Replacement/Installation Procedure

StepsActionClick Image to Enlarge
1Open the Front Door.
2Grasp the handle and pull out the cartridge.
3Unpack a new cartridge.

Warning—Potential Damage: When replacing a toner cartridge, do not leave the new cartridge exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems.

4Firmly shake the new cartridge front-to-back and side-to-side to evenly distribute the toner.
5Insert or slide the new cartridge into the appropriate position inside the MFP.
6Push the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.No Image
7Close the Front Door.

After performing the steps above, the MFP performs a motor cycle and clears the Replace Toner warnings. Then the MFP returns to the Ready state.

Still Need Help?

Please contact Lexmark Technical Support if you need additional assistance.
When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, How to Locate the Serial Number, Machine Type, Part Number and Config ID on the Lexmark X86xe Series Printer.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.


Was this article helpful?