This article details how to enable automatic population of the Reply: address when using the scan to email function.
To enable automatic population of the Reply: address field when NT authentication is being used, set the MFP's default Reply: address to the following:
Thus, when a user logs into the MFP, the Reply: address field on all e-mail scanned by that user will be populated as follows:
where <userid>is the login name used to authenticate the MFP user. For example, if the login name used for authentication is JSMITH, the Reply: address field will be populated with the e-mail address JSMITH@ EMAILDOMAIN.COM.
NOTE:This process assumes that the MFP is already configured for scanning to email. If you need assistance in setting up the MFP for this functionality, refer to .
IMPORTANT– Device Exception
On older models, this function cannot be associated with eSF security setup because these models does NOT have "security templates". This is functioning as designed. When using badge authentication or screen authentication such as in a print release environment, users will have to "double login". See list of printer models below:
|X642, X644, X646
|X850, X852, X854
The only way for this parameter to work in older devices is the “double authentication” method. Double authentication means; you will have to swipe your badge to authenticate to device, and then authenticate to the chosen App once again. For example, to access scan to email:
1. You have to swipe your badge (1st authentication),
2. Press Email, and then you will be asked to enter your LDAP credentials (2nd authentication).
to view the steps to configure the MFP for LDAP authentication and authorization.
Still need help?
Please contact Lexmark Technical Support if you need additional assistance.
NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN).
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID: HO1682