Skip to Content Information Center
Lexmark X952

Lexmark X952

The Finisher Hole Punches Option Is Not Available

What you will see

When trying to use the 2 – 4 hole punch option (EMEA) or 2 – 3 hole punch option (NA) of the Lexmark C95x or X95x Finisher, the said option is missing from the printer’s control panel.


To resolve this issue, it is recommended to flash the PJL file to the printer. This will reboot the printer immediately after the file has been sent. Please select the appropriate file to download for your printer:

If issue re-occurs, please contact Lexmark Technical Support or a local authorized service provider to arrange a service call.

Still need help?

If you require additional assistance, please close this window and locate

Get in Touch with Lexmark! for contact information.
When calling for support, you will be asked for your machine/model type and serial number (SN). Should you need help locating your printer's model type and serial number, How to Locate the Serial Number, Machine Type, and Configuration ID on a Lexmark C950 or X95x Printer/MFP.

Please be near the products described in this article to expedite the support process and reduce callbacks.


Was this article helpful?