This document describes the proper way of installing a replacement ribbon cartridge in the Lexmark 258x+ & 259x+ Forms printer models.
In some cases, incorrect fitting of the cartridge may result in the carrier unit being dislodged. Should this happen, the subsequent procedure describes how to re-seat the carrier unit.
How to remove and replace the ribbon cartridge
Lift the left and right release latches on the ribbon access cover to remove it. Place the ribbon access cover on a flat surface.
Squeeze the left and right latches on the ribbon cartridge to lift it out of the printer.
Place the new ribbon cartridge on top of the carrier unit.
Turn the ribbon advance knob and make sure that the ribbon is not caught in the carrier unit.
Squeeze the ribbon cartridge's left and right latches and then press them down evenly on both sides. Ensure that the cartridge is seated firmly.
Note: The video below will demonstrate the proper installation of the ribbon cartridge.
You need QuickTime to be able to play the video file. Click the button to download QuickTime now.
A pop-up message might appear saying "QuickTime Player needs your permission to run". Click "Always run on this site."
How to Fix a Dislodged Carrier Unit
Follow the procedure below to reinstall the carrier unit in the event that it has been dislodged, (such as shown in the image below).
|Click Image to Enlarge
Still need help?
If you require additional assistance, please close this window and locate Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your printer model/machine type and serial number (SN). If you need help locating these, How to Locate the Serial Number on a Lexmark 24xx/25xx/25xx+ Series Forms (Dot Matrix) Printer.
Please be near the products described in this article to expedite the support process and reduce callbacks.
LEGACY ID: HO3945