Skip to Content Information Center
Lexmark X852

Lexmark X852

Lexmark T64x, W84x, X64Xe, X85Xe, C77Xn, C52Xn and MarkNet N7000 Series Print Servers: How to Enable/Disable the Banner Page


Affected Products:


T64x, C77Xn and C52Xn

Multifunction: W84x, X64Xe and X85Xe

Solution: MarkNet N7000 Series Print Servers


Audience: All Users

Banner Page Contents

The following information will be seen on the network card banner page:

  • Job Owner:

  • Host O/S:

  • File Name:

  • Job Source:

  • Queue Name:


If your observed banner page contains information that differs from the items listed above, it is likely the banner page is originating from somewhere other than the printer.

Banner Page: Embedded Web (http) Server

(C52Xn, T64X, W84X, C77X, X64Xe, X85Xe, N7000e, N7002e)

  1. Enter the printer/print server TCP/IP address into the browser's URL address field (e.g.


  2. Click Configuration.

  3. Click General Settings.

  4. Place or remove a checkmark next to Banner Page as appropriate, then click Submit.

Banner Page: Embedded Web (http) Server

(MarkNet N7020e - 4 USB ports)

  1. Enter the print server TCP/IP address into the browser's URL address field (see the example in Step 1 above).

  2. Click Configuration.

  3. Click Network/Ports.

  4. Click USB Port Configuration.

  5. Place (or remove) a checkmark next to Banner Page for each USB port (1-4).

  6. Click Submit.

Banner Page: Operator Panel

(MarkNet N7000e, N7002e, N7020e)

  1. Press


  2. Press

    until the LCD displays Network Card. Press

  3. Press

    until LCD displays Banner Page. Press

  4. Press

    to toggle between ON and OFF.

  5. Press

    to save the change. The message Submitting Selection is displayed on the LCD.

Banner Page: Universal Configuration File


- Advanced Users

  1. Create a UCF, setting the UCF operator INTBANNERPAGE to 0 (disable) or 1 (enable). Click


    for an example.


32 and 64 bit operating systems require an additional blank line below the UCF operator.

  1. FTP

    the file to the printer/print server.


For the X64Xe and X85Xe products, it is recommended to send the file through the

Import/Export Settings

option on the web page. Path: Configuration, Import/Export, Import Settings File.

Banner Page: MVP

MVP does not allow direct control of this feature, but does allow access to the http server via

Web Page (print server)

under the All Tasks option.

Related Articles

  • For Banner Page information relating to older products, click


  • For instructions on sending a UCF file through MVP, click


Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)

  • Printer serial number

  • Solution


Was this article helpful?