Skip to Content Information Center
Lexmark CS317

Lexmark CS317

TCP/IP menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > TCP/IP
  • Network/Ports Network  [x] > Network  [x]  Setup > TCP/IP

Note:  This menu is available only in network printers or printers that are attached to print servers.

UseTo

    Set Hostname

Set the current TCP/IP hostname.

    IP Address

View or change the current TCP/IP address.

Note:  Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP.

    Netmask

View or change the current TCP/IP netmask.

    Gateway

View or change the current TCP/IP gateway.

    Enable DHCP

  • On
  • Off

Specify the DHCP address and parameter assignment.

Note:  On is the factory default setting.

    Enable RARP

  • On
  • Off

Specify the RARP address assignment setting.

Note:  Off is the factory default setting.

    Enable BOOTP

  • On
  • Off

Specify the BOOTP address assignment setting.

Note:  On is the factory default setting.

    Enable AutoIP

  • Yes
  • No

Specify the Zero Configuration Networking setting.

Note:  Yes is the factory default setting.

    Enable FTP/TFTP

  • Yes
  • No

Send files to the printer using the built‑in FTP server.

Note:  Yes is the factory default setting.

    Enable HTTP Server

  • Yes
  • No

Enable the built-in Web server (Embedded Web Server) which lets you monitor and manage the printer remotely using a Web browser.

Note:  Yes is the factory default setting.

    WINS Server Address

View or change the current WINS server address.

    Enable DDNS

  • Yes
  • No

View or change the current DDNS setting.

Note:  Yes is the factory default setting.

    Enable mDNS

  • Yes
  • No

View or change the current mDNS setting.

Note:  Yes is the factory default setting.

    DNS Server Address

View or change the current DNS server address.

    Backup DNS Server Address  [x]

View or change the current DNS server address.

    Enable HTTPS

  • Yes
  • No

View or change the current HTTPS setting.

Note:  Yes is the factory default setting.

Was this article helpful?
Top