Lexmark MS810n / MS810dn / MS810dtn
Note: This menu appears only when an optional parallel card is installed.
Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Set the size of the parallel input buffer.
Temporarily store print jobs on the printer hard disk before printing.
Enable bidirectional communication through the parallel port.
Specify the parallel port protocol.
Determine if the printer honors printer hardware initialization requests from the computer.
Parallel Mode 2
Determine if the parallel port data is sampled on the leading or trailing edge of a strobe.
Note: On is the factory default setting.
Mac Binary PS
Set the printer to process Macintosh binary PostScript print jobs.
Set the network address information for an external print server.
Note: This menu item is available only if the printer is attached to an external print server through the USB port.
Set the netmask information for an external print server.
Set the gateway information for an external print server.