110.20 | The printhead error was detected before the motor was turned on. | See Printhead service check. |
110.21 | The printhead power was off when the laser servo started. |
110.31 | The printhead error (no first Hysnc) was detected. |
110.32 | The printhead error (lost first Hysnc) was detected. |
110.33 | The printhead error (lost first Hysnc) was detected during servo. |
110.34 | The printhead error (mirror motor lost lock) was detected. |
110.35 | The printhead error (mirror motor no first lock) was detected. |
110.36 | The printhead error (mirror motor never stabilized) was detected. |
110.41 | The printhead NVRAM read failure occurred. |
110.70 | The printhead NVRAM values were incorrect. |
110.71 | The printhead timing measurement error was detected. |
110.90 | The video cable was unplugged. |
110.91 | The printhead timing reading error was detected. |
110.92 | The printhead NVRAM checksum mismatch occurred. |