Skip to Content Information Center
Lexmark CX725

Lexmark CX725

Removal procedures

Keep the following tips in mind as you replace parts:

  • Some removal procedures require removing the cable ties. Replace the cable ties during reassembly to avoid pinching wires, obstructing the paper path, or restricting mechanical movement.
  • Remove the toner cartridges, imaging unit, and media tray before removing other printer parts. The imaging unit should be carefully set on a clean, smooth, and flat surface. It should also be protected from light while out of the device.
  • Disconnect all external cables from the printer to prevent possible damage during service.
  • Unless otherwise stated, reinstall the parts in reverse order of removal.
  • When reinstalling a part held with several screws, start all screws before the final tightening.
Was this article helpful?
Top